2022 Vexus AVX1980cc
$39,995.00
Key Features
Product Features
2021 Yamaha SHO115 (40 hours or less)
2022 Vexus Trailer
This boat is in great shape and water ready. Very low hours and well maintained.
Leaning post was swapped out for dual captain chairs for comfort and a better performance look.
Ttop
ipilot
Manual Jack Plate
Aluminum Swim Ladder
Lowrance Elite GPS
Light bar on ttop
8ft Power pole
Spare tire
Swing away tongue
4 blade stainless prop (*3 blade stainless prop available if preferred*)
For all questions or concerns, or to schedule an appointment to view, please call Brett at 504-400-9572
Description
From the constant demands of brackish and coastal waters to the incredible diversity of inland rivers and reservoirs, the all-new 1980cc is redefining what inshore boats can and should be. The 19’10” center console design is balanced on a broad 95” beam and equipped with a world of standard features, floor space, and storage. Bow to stern, it’s a precision-crafted machine built to go head-to-head with everything from redfish and flounder to striper, crappie, and catfish.
Running on an our exclusive AVX Dense Base™ hull design, this Fiberglass-Infused Aluminum Hybrid™ literally dominates rough water with a super-smooth, solid, and shallow-running ride. Hole shots are faster than a hookset, and the responsive handling of hydraulic steering makes this platform a powerful rig to run.
Inside, our Tru-Trek™ skid resistant floor surface is engineered with a tread-gripping, super-tough polyurea bond that’s easy-to-clean and ultra-durable. It’s complemented by even more long-lasting protection in our Hard Case™ exterior paint as well as the painted undersides to the lids. Combined with a roomy, walk-around layout and even more space from the toe kick (with LED lighting) beneath the console, this wide-open rig is geared for serious fishing, bow to stern. The 150-rated design is further enhanced with an oversized, aerated well including splash guards, filter screens, and pump-out. At the helm, the fiberglass console is equipped with speed, tach, fuel, trim, and water pressure gauges as well as lit-tip switches, cup holders, and a wide choice of flush-mounted electronics. Also amidships, our multi-position seat and leaning post is custom engineered for optimum support, comfort, and convenience.
Elsewhere, twin 8 ½’ rod boxes balance the front deck while a built-in step/cooler sits just aft of another large set of lockable storages. The convenience of an extra livewell/baitwell is also available up front. Built with the added strength of insulated fiberglass, each of these forward compartments includes a raised lip and rubber trim seal as well as compression latches to help keep out moisture. Just aft of the console, a pair of fold-down jump seats not only maximize deck space but provide even more room for friends and family. You’ll note the same attention to detail in the rear power compartment. From the wide opening to the spacious interior, this box is built for quick, confident access to the bilge, pumps, and fuel system. Combined with a Minn Kota Fortrex Riptide trolling motor, 3-bank on board charger, 26-gallon fuel capacity, the unparalleled strength of our Vector Force™ transom, availability of single or dual shallow water anchors, and our custom-built aluminum trailer, this wood-free rig is more than an ultra-versatile center console design… It’s a budget-minded machine intent on opening-up the shallows and dominating the most demanding days – in and out of the salt.
- Length: 19' 10"
- Horsepower: 115-150
- Beam: 95"
- Fuel: 26 gal
- Rod Box Lengths: 8'6" Port / 8'6" Starboard
- Insulated Fiberglass Cooler With Seal and Drain: In a world full of coolers that cost hundreds of dollars, we provide one built into the boat itself. It's over insulated with foam, has a built-in drain, and the smooth, durable gel-coated interior is made to take the demands an avid angler will throw at it. Not to mention it's easy to access from outside the boat and is tucked away under deck so space isn't hindered for your hydration.*Forward livewell/baitwell also available.
- Stretch-Formed Gunnels: Just because the hull is built out of aluminum doesn't mean it has to resemble your grandfather's jon boat. Our exclusive stretch-formed gunnels provide a sleek look that's often mistaken for fiberglass. Not only does the design create more deck space and room to fish but it delivers an incredibly smooth, solid, and quiet rough water ride.
- Oversized Gelcoat/Fiberglass Front Storage Boxes: No more flimsy plastic drop in boxes held to the rig with wood screws. We designed our fiberglass boxes to be roughly three times the size while being sealed and foamed into each AVX. The raised lid openings provide a drier seal and protect the precious contents.
- Skid-Resistant Polyurea Interior: Our Tru-Tek™ floor surface is a tread-gripping polyurea bond that's ultra-durable and easy to clean. By replacing carpet, it allows the angler to confidently venture into salt or brackish waters.
- Custom Leaning Post/Seat: Our multi-position leaning post adjusts to the driver's preference and weather conditions. This exclusive design provides comfort without tying up precious interior space.
- Fiberglass Console: We don't simply screw our console to the floor. It's mounted to a fiberglass island providing a toe rail that increases floor space and hides strip LED lighting. Inside you'll find batteries and rigging with easy access. We even go so far as to mount the master power switch and charger plug outside the console. Saving that unnecessary climb back into the boat when the day is done. Cupholders, rod holders, windshield, and grab rail make this console a true work station.
- Dual Rod Box Setup at Bow: Protecting today's high-tech rod/reel combos is important. We do that with dual rod boxes that literally cradle the equipment in place. Our enclosed, tapered rod tubes allow for individual storage without the worries of rod tips hanging on the end of the tubes.
- Stainless Pull-Up Tie Cleats: Stop breaking rods and tearing clothing. Our stainless-steel pull-up cleats stay out of the way until they're needed.
- Compression Lid Locks: One key to providing drier storage is to help ensure the lid completely seals. We accomplish this by using compression locks that pull the lid tight against the rubber seal
- Hard Case™ Paint: Many aluminum boats receive the same paint that's applied to a cheap utility trailer. Instead, we paint the entire hull showing no raw aluminum and the matching color is protected by a Hard Case™ clear coat. This provides a lasting finish that ensures a great look for years to come and ultimately increases resale value.
- Rear Jump Seats: These fold-down, jump seats reinforce the exceptional versatility and total performance nature of our AVX center console design. Providing exceptional comfort and added room for additional passengers, this custom feature adds even more room to an already spacious rear deck.
- All-Welded High-Performance Pad Hull: Our ground-breaking AVX high-performance pad hull enjoys a running surface with less drag, increased bow lift, and superior overall handling and performance. The manufacturing processes we use create a consistent running surface not found in other brands.
- Custom Built Vexus® Trailer: Don't settle for a trailer built by the lowest bidder. Ours are built in-house, alongside your boat. But we don't stop there. An ultra-strong, Channel frame, UV-protected polyurea coating, LED lights, matching fenders, aluminum wheels, and corresponding paint accents highlight the unparalleled package.
- Loaded With Standard Features: You won't see us offering base-level equipment that keeps the starting price artificially low. As avid anglers ourselves, we package the boats like we would want them. You'll find our entire lineup has a stainless-steel propeller, stainless boarding ladder, smooth hydraulic steering, an onboard charger, and a proven Minn Kota Trolling motor built into the price.
- Oversized Seal for Lid Openings: Our oversized seals force water away from the lid openings. Evacuating the water is critical to keeping your gear dry.
- Vector Force™ Transom: Our Vector Force Transom is constructed of .125" aluminum and reinforced with 60% more material than the industry standard. The transom is the very foundation of the boat structure and at Vexus we're focused on ensuring anglers can outfit their rig with today's setback plates and shallow water anchors. Many others not only don't offer these options, but installing them actually voids the warranty.
- Wood-Free Design: Knowing that your AVX doesn't rely on any type of wood reinforcement is more than comforting. It's Wood-Free Confidence that translates into worry-free outings. Now, you can leave the regret of corner-cutting composites and squeaky, rotten plywood far behind.
- Solid State Wiring and Lit Tip Switches: There's no room for cheap, snap locks and failure-prone fuses in our wiring harnesses. Instead, waterproof connectors and resettable breakers are coupled with our heavy gauge wiring for the ultimate in confidence and reliability.
- Seafoam
- Summit White
- Silver Spectrum
- Spphire Blue Metallic
- Midnight Oil Metallic
- Crimson Metalic
- Available with Power of Choice Professionally Rigged Outboards
- All-welded AVX High Performance Hull
- Vector Force™ Solid Transom
- Dense Base™ Superstructure Design
- Stainless Steel Prop
- Crank Battery includes Battery Tray and Tie-Down
- SeaStar™ Pro Smooth Hydraulic Steering
- Binnacle Throttle Control
- Tournament Grade Insulated Fiberglass Aerated Livewell with Anti-Splash Ring
- Multi-Function Livewell controls with Fill, Recirculate and Pump Out
- Trim and Navigation Light Switches
- Speed, Tach, Fuel, Trim, and Water Pressure Gauges
- Balanced Weight Distribution & Design
- Trac-Tight™ Handling
- 26 Gallon Fuel Tank
- Wide Variety of Custom Factory-Rigged Electronics
- 6 Gauge Trolling Motor Wiring
- Minn Kota Fortrex Riptide SF80 52" Trolling Motor
- Dual Pro 6x3 On-board Battery Charger with Easy Access Charger Plug
- USB & 12V Power Outlets
- Bilge Pump
- Integrated Bow Lights with Removable Stern Navigation Light
- Easy Access Master Power Switch and Breakers
- Lit-Tip Toggle Switches with Convenient Resettable Breakers
- Integrated Horn Assembly
- Custom-contoured High Performance Multi Postion Leaning Post
- Port and Starboard Jump Seats
- Powder Coated Console Grab Rail and Leaning Post Frame
- Oversized Fiberglass Storage Boxes with Raised Lip Dam and Weather Trim Seal
- Wide Open Spacious Interior
- Aluminum Decks and Floors
- Compression Lid Latches
- Stainless Steel Bow and Stern Eyes
- Lockable Storage and Rod Boxes
- Stainless Steel Boarding Ladder
- 3-Position Livewell Control
- Front Deck Step with Integrated Insulated Fiberglass Cooler/Baitwell
- Upright Level Flotation
- Stainless Steel Pop-Up Cleats
- Injected Closed Cell Foam with Sound Dampening Advantage
- Dual Side Carpet Free Rod Storage with Tubes, Raised Lip Dam and Weather Trim Seal
- Hard Case™ Paint with Clear Coat Protection
- Glass-Infused Aluminum Hybrid™ Design
- Stretch-Form Gunnels
- Fiberglass Console with Integrated Rod Storage and LED Lit Toe Rail
- All Exterior Surfaces Painted
- Painted Underside of Lids
- Large diameter SS Seat Bases
- Tru-Trek™ Floor and Decks
- SS Steering Wheel
- Wood-free Construction
- 4" Channel Aluminum Frame
- 14" Aluminum Wheels with Radial Tires
- Diamond Plate Step Pads
- Custom SS Fenders
- Hydraulic Surge Disc Brakes
- LED Lighting with Back-up Lights
- Trailer Tongue Jack
- Swing-Away Tongue
- Leaf Spring Axle
- Wire Protected Housing
- Forged (not cut) Transverse Channel Support Beams
- Custom-fitted Bunks
- Integrated Load Guides
- Vault Hybrid Hubs
- Length 19'10"
- HP 115-150
- Beam 95"
- Fuel 26 gallons
- Rod Box Length Port 8'6"
- Rod Box Length Starboard 8'6"
- Overall Width 8'2"
- Overall Boat/Motor/Trailer Length (tongue open) 22'6"
Engine
| Max HP | 150 HP |
General
| Length Overall | 19 ft. 10 in. |
| Beam | 95 in. |
| Fuel Capacity | 26 gal. |
| Impeller / Prop | Stainless Steel Prop |
